Keysight N4877A Demultiplexer Recupero Dati e Clock
Keysight N4877A Clock Data Recovery Demultiplexer
Richiedi un preventivo
Keysight N4877A Recupero Dati Clock e Demultiplexer funziona da 50 Mb/s a 32 Gb/s con larghezza di banda ad anello sintonizzabile e jitter rms di 100 fs per test BER.
Dettagli prodotto
| Modello | N4877A |
| Produttore | Keysight |
| Categoria | Test di Velocità di Errore in Bit |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
N4877A è un dispositivo di recupero dati clock (CDR) e demultiplexer progettato per testare dispositivi seriali ad alta velocità. Funziona in una vasta gamma da 50 Mb/s a 32 Gb/s, fornendo spazio importante per standard emergenti e applicazioni esistenti. Il demultiplexer 1:2 integrato consente test economici dei ricevitori con strumenti BERT Keysight per velocità di dati superiori a 12.5 Gb/s.
Caratteristiche Principali
- Intervallo di funzionamento da 50 Mb/s a 32 Gb/s con versione opzionale 16G fino a 16.5 Gb/s
- Larghezza di banda ad anello sintonizzabile fino a 20 MHz con picco selezionabile
- Uscita clock e clock ausiliario con jitter residuo basso come 100 fs rms
- Demultiplexer 1:2 integrato per test a velocità secondaria
- Ingresso ad alta sensibilità per rilevazione di piccoli segnali
- Interfaccia grafica tramite connessione USB
Applicazioni
- Caratterizzazione ricevitore 100GbE
- Test Fibre Channel 32GFC e 16GFC
- Standard informatici: USB 3.0, SATA, SAS, PCIe incluso PCIe gen4
- Recupero clock dai flussi di dati quando segnali clock non disponibili
- Pulizia clock e riduzione jitter per misurazioni di precisione
Specifiche tecniche
| Characterize Next-Generation Receivers and Transmitters | The N4877A Clock Data Recovery is designed to operate over from 50 Mb/s to 32 Gb/s. The wide data rate range allows testing of emerging standards like 100GbE and 32GFC while covering existing lower speed standards. The 16G option operating up to 16.5 Gb/s is ideal for 16GFC as well as computer standards like USB 3.0, SATA, SAS and PCIe including PCIe gen4. |
| Recover Clocks or Clean-Up Clocks | The N4877A provides necessary clock signals for BERTs or oscilloscopes when access to appropriate clock signals from the device under test (DUT) is not possible. The N4877A recovers clocks from data streams if a clock is not available or can act as clean-up PLL for existing clocks with excessive intrinsic jitter to allow accurate measurements. |
| Simplify Receiver Testing of high speed Devices | The N4877A Clock Data Recovery and Demultiplexer 1:2 is the counterpart to the N4876A Multiplexer 2:1 and complements Keysight's J-BERT and ParBERT based receiver test solutions for data rates between 12.5 Gb/s and 28.4 Gb/s. |
| Features | Parameters |
| Power Consumption | 100–240 V, ~50/60 Hz, 90 VA, max |
| Operating Temperature | 10 to 40 °C |
| Storage Temperature | –40 to 70 °C |
| Operating humidity | 95% relative humidity, non-condensing |
| Storage Humidity | 50% relative humidity |
| Connectors Rear Panel | USB; LAN; IEC power connector |
| Rack Mount without Bumper | 1/2 x 19“ width, 1U height: 213 x 44.5 x 360 mm (8.4 x 1.8 x 14.2 in) |
| Weight Net | 2.9 kg (6.4 lb) |
| Weight Shipping | 5.5 kg (12.1 lb) |
Richiedi un preventivo
Keysight N4877A Demultiplexer Recupero Dati e Clock
Risposta entro 24 ore
Senza impegno
Comunicazione diretta