Calibratore Multi-Prodotto Fluke 5080A
Fluke 5080A Multi-Product Calibrator
Richiedi un preventivo
Il Fluke 5080A è un calibratore multi-prodotto ad alta conformità con conformità di tensione AC/DC 800 mA e conformità di corrente AC/DC 50 V per diversi strumenti analogici.
Dettagli prodotto
| Modello | 5080A |
| Produttore | Fluke |
| Categoria | Strumenti di Calibrazione |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
Il Fluke 5080A è un calibratore multi-prodotto ad alta conformità progettato per fornire una taratura accurata di metri analogici, pannelli di controllo, multimetri digitali e altri strumenti di misurazione. Con conformità massima di tensione di 800 mA per misura di tensione AC/DC e 50 V per misura di corrente AC/DC, il 5080A offre la versatilità necessaria per una vasta gamma di applicazioni industriali e di laboratorio.
Caratteristiche Principali
- Conformità di tensione e corrente elevate (600 mA CC, 800 mA CA per misura di tensione; 50 V CC/CA per misura di corrente)
- Intervallo di tensione CC 0 a ±1020 V con precisione di specifica migliore ±0.01%
- Intervallo di corrente CC 0 a ±20.5 A con precisione di specifica migliore ±0.05%
- Misurazione della resistenza 0 a 190 MΩ con precisione ±0.025%
- Tensione CA da 1 mV a 1020 V (45 Hz a 1 kHz) con precisione di specifica ±0.1%
- Corrente CA da 29 mA a 20.5 A (45 Hz a 1 kHz) con precisione ±0.1%
- Misurazione della fase 0 a ±179.99° con precisione ±0.25°
- Interfacce RS-232 e Ethernet per il funzionamento remoto e la registrazione dei dati
- Circuiti di protezione per il funzionamento sicuro
Applicazioni
- Taratura di metri e manometri analogici
- Test di multimetri digitali a 3.5 e 4.5 cifre
- Taratura di pannelli di controllo e wattmetri
- Taratura di metri a pinza (con accessorio bobina opzionale)
- Taratura di megohm-metri (opzionale)
- Taratura di oscilloscopi fino a 200 MHz (opzionale)
Specifiche tecniche
| Features | Parameters |
| Voltage DC | Range: 0 to ±1020V Best 1 Year Specification: ±0.01% of setting |
| Current DC | Range: 0 to ±20.5A Best 1 Year Specification: ±0.05% of setting |
| Resistance | Range: 0 to 190 MO 19 values in x1 and x1.9 Best 1 Year Specification: ±0.025% of setting |
| Voltage AC | Range: 1 mV to 1020V 45Hz to 1 kHz, Sine Best 1 Year Specification: ±0.1% of setting |
| Current AC | Range: 29 mA to 20.5A 45 Hz to 1 kHz, Sine Best 1 Year Specification: ±0.1% of setting |
| DC Power | Range: 10.9 mW to 20.5 kW Best 1 Year Specification: ±0.11% of setting |
| AC Power | Range: 10.9 mW to 20.5 kW 45-65 Hz, PF=1 Best 1 Year Specification: ±0.36% of setting |
| Phase | Range: 0 to ± 179.99° 45 Hz to 1 kHz Best 1 Year Specification: ±0.25° of setting |
| Frequency | Range: 45 Hz to 1 kHz Best 1 Year Specification: ±50 ppm of setting |
| Warm up Time | Twice the time since last warmed up, to a maximum of 30 minutes |
| Settling Time | Less than 5 seconds for all functions and ranges except as noted |
| Standard Interfaces | RS-232 and Ethernet |
| Temperature Performance | Operating: 0°C to 50°C Calibration (tcal):15°C to 35°C Storage:-20°C to +70°C |
| Temperature Coefficient | Temperature coefficient for temperatures outside tcal ±5 °C is 10 % of the stated specification per °C for temperatures in the range of 0 °C to 35 °C. Above 35 °C, the temperature coefficient is 20 % of the stated specification per °C. |
| Relative Humidity | Operating: <80% to 30°C, <70% to 40°C, <40% to 50°C Storage: <95%, non-condensing |
| Altitude | Operating: 2,000m (6,500 ft) maximum Non-operating: 12,200m (40,000 ft) maximum |
| Safety | Meets EN. 61010-1:2001, CAN/CSA-C22.2 No. 61010-1-04, UL 61010-1: 2004 |
| Analog Low Isolation | 20V |
| EMC | Meets EN613261:2006. |
| Line Power | Line Voltage (selectable): 100V, 120V, 220V, 240V Line Frequency: 47 to 63 Hz Line Voltage Variation: + 10% about line voltage setting |
| Power Consumption | 600 VA |
| Calibration Documentation | Report of calibration with data included; 17025 accredited report optional |
| Dimensions | Height: 19.3 cm (7.6 in) Width: 43.2 cm (17 in), 44.3 cm (17.5 in) including handles Depth: 53.8 cm (21.2 in) |
| Weight (without options) | 22 kg (48 lbs.) |
| Absolute Uncertainty Definition | The specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. It is not necessary to add anything to determine the total specification for the temperature range indicated. |
| Specification Confidence Interval | 99% |
| 5080A | 600 mA800 mA50 V44 V |
| 5080A | Multi-Product Calibrator |
Richiedi un preventivo
Calibratore Multi-Prodotto Fluke 5080A
Risposta entro 24 ore
Senza impegno
Comunicazione diretta