Fluke 5500A-SC Calibratore Oscilloscopio
Fluke 5500A-SC Oscilloscope Calibrator
Richiedi un preventivo
Calibratore multi-prodotto Fluke 5500A-SC con calibrazione oscilloscopio integrata fino a 600 MHz per verifica elettrica completa.
Dettagli prodotto
| Modello | 5500A-SC |
| Produttore | Fluke |
| Categoria | Strumenti di Calibrazione |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
Fluke 5500A-SC è un calibratore elettrico completo con capacità di calibrazione oscilloscopio integrata. Fornisce tensione e corrente continua e alternata con molteplici forme d'onda, simula la potenza con controllo di fase e può fornire segnali di resistenza, capacità e temperatura da termocoppie e RTD. La funzione di calibrazione oscilloscopio integrata fornisce segnali di onda sinusoidale di livello, fronte veloce, marchio di tempo e ampiezza per la calibrazione dell'oscilloscopio fino a 600 MHz.
Caratteristiche Principali
- Range di tensione continua 0 a ±1020V con accuratezza ±50 ppm
- Range di corrente continua 0 a ±11A con accuratezza ±0.01%
- Tensione alternata 1 mV a 1020V (10 Hz a 500 kHz) con accuratezza ±0.03%
- Corrente alternata 29 mA a 11A (10 Hz a 10 kHz) con accuratezza ±0.06%
- Sorgente di resistenza 0 a 3.29 MΩ con accuratezza ±0.009%
- Sorgente di capacità 0.33 nF a 1.1 mF con accuratezza ±0.25%
- Simulazione termocoppia -250°C a +2316°C (11 tipi)
- Sorgente RTD -200°C a +630°C (8 tipi)
- Sorgenti di potenza continua e alternata fino a 11 kW con accuratezza ±0.08% a ±0.15%
- Controllo di fase 0 a ±179.99° con accuratezza ±0.15°
- Range di frequenza 0.01 Hz a 2.0 MHz con accuratezza ±25 ppm
- Calibrazione oscilloscopio integrata fino a 600 MHz
- Interfacce IEEE-488 (GPIB), RS-232 e opzionali 5725A
Applicazioni
- Calibrazione di oscilloscopi e strumenti di test ScopeMeter
- Calibrazione di multimetri portatili e da banco
- Calibrazione di wattmetri e analizzatori di potenza
- Calibrazione di termometri termocoppia e RTD
- Calibrazione di logger di dati e registratori a carta scorrevole
- Calibrazione di calibratori di processo e pinze amperometriche
- Calibrazione completa degli strumenti elettrici
Specifiche tecniche
| Features | Parameters |
| Voltage DC | Range: 0 to ±1020V Best 1 Year Specification: ±50 ppm of setting |
| Current DC | Range: 0 to ±11A Best 1 Year Specification: ±0.01% of setting |
| Resistance | Range: 0 to 3.29.999 MΩ Best 1 Year Specification: ±0.009% of setting |
| Voltage AC | Range: 1 mV to 1020V 10 Hz to 500 kHz, Sine Best 1 Year Specification: ±0.03% of setting |
| Current AC | Range: 29 m A to 11A 10 Hz to 10 kHz, Sine Best 1 Year Specification: ±0.06% of setting |
| Capacitance | Range: 0.33 nF to 1.1 mF Best 1 Year Specification: ±0.25% of setting |
| RTD Source | Range: -200°C to +630°C (8 types) Best 1 Year Specification: ±0.03°C of setting |
| DC Power | Range: 109 mW to 11 kW Best 1 Year Specification: ± 0.08% of setting |
| AC Power | Range: 109 mW to 11 kW 45-65 Hz, PF=1 Best 1 Year Specification: ± 0.15% of setting |
| Phase | Range: 0 to ± 179.99° Best 1 Year Specification: ±0.15° |
| Frequency | Range: 0.01 Hz to 2.0 MHz Best 1 Year Specification: ±25 ppm of setting |
| Warm up Time | Twice the time since last warmed up, to a maximum of 30 minutes |
| Settling Time | Less than 5 seconds for all functions and ranges except as noted |
| Standard Interfaces | IEEE-488 (GPIB), RS-232, 5725A (5500A only) |
| Temperature Performance | Operating: 0°C to 50°C Calibration: (tcal): 15°C to 35°C Storage: -20°C to 70°C |
| Temperature Coefficient | Temperature coefficient for temperatures outside tcal ± 5°C is 10% of the 90-day specification (or 1-year, as applicable) per °C |
| Relative Humidity | Operating: < 80% to 30°C, < 70% to 40°C, < 40% to 50°C Storage: < 95%, non-condensing |
| Altitude | Operating: 3,050m (10,000 ft) maximum Non-operating: 12,200m (40,000 ft) maximum |
| Safety | Designed to comply with: IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-C22.2 No. 1010.1-92 |
| Analog Low Isolation | 20V |
| EMC | Designed to comply with FCC Rules Part 15 |
| Line Power | Line Voltage (selectable): 100V, 120V, 220V, 240V Line Frequency: 47 to 63 Hz Line Voltage Variation: ± 10% about line voltage setting |
| Power Consumption | 300 VA |
| Calibration Documentation | 17025 accredited report of calibration included |
| Dimensions | Height: 17.8 cm (7 in), standard rack increment, plus 1.5 cm (0.6 in) for feet on bottom of unit Width: 43.2 cm (17 in), standard rack width Depth: 47.3 cm (18.6 in) overall |
| Weight (without options) | 20 kg (44 lbs.) |
| Absolute Uncertainty Definition | 5500A and 5520A uncertainty specifications include stability, temperature coefficient, linearity, line and load regulation, and the traceability of the external standards used for calibration. You do not need to add anything to determine the total uncertainty of your calibrator for the temperature range indicated. |
| Specification Confidence Interval | > 99% |
| 5500A-SC300 | 300 MHz Oscilloscope Calibration Option |
| 5500A-SC600 | 600 MHz Oscilloscope Calibration Option |
Richiedi un preventivo
Fluke 5500A-SC Calibratore Oscilloscopio
Risposta entro 24 ore
Senza impegno
Comunicazione diretta