Misuratore di Potenza EXFO FPM-302
EXFO FPM-302 Power Meter
Richiedi un preventivo
Misuratore di Potenza EXFO FPM-302 offre misura di potenza ottica precisa con 10 lunghezze d'onda calibrate, autonomia batteria 300+ ore, e riconoscimento automatico lunghezza d'onda per test fibra ottica.
Dettagli prodotto
| Modello | FPM-302-XX |
| Produttore | EXFO |
| Categoria | Test di Reti e Fibre Ottiche |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
EXFO FPM-302 è un misuratore di potenza ottica portatile progettato per test e manutenzione rete fibra ottica. Parte della serie FPM-300, fornisce misure di potenza altamente accurate con 10 lunghezze d'onda calibrate e compatibilità diretta con fonte luminosa FLS-300 EXFO e set test perdita ottica FOT-300.
Caratteristiche Principali
- 10 lunghezze d'onda calibrate da 830 nm a 1625 nm con valori di riferimento
- Riconoscimento automatico lunghezza d'onda se usato con fonti EXFO compatibili
- Intervallo potenza 10 a –60 dBm con risoluzione 0.01 dB
- Autonomia batteria superiore a 300 ore per distribuzioni campo prolungate
- Annullamento offset automatico per precisione misura migliorata
- Garanzia tre anni con intervallo ricalibratura consigliato tre anni
- Design portatile robusto ergonomico con refresh schermo 3 Hz
Applicazioni
- Test rete ottica passiva (PON) a lunghezze d'onda consigliate ITU-T (1310, 1490, 1550 nm)
- Installazione fibra ottica, commissioning e validazione sistema
- Manutenzione rete e troubleshooting campo
- Test infrastruttura telecomunicazioni
Specifiche tecniche
| Auto-Wavelength Recognition | The FLS-300 or FOT-300 units can transmit with a wavelength-identification digital encrypted protocol, enabling the FPM-300 power meter to automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error. |
| Distant Referencing | Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart. |
| FTTx Ready | EXFO’s FPM-300 allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs. |
| Model² | FPM-302FPM-302X |
| Power Meter Port | GeGeX |
| Power Range (dBm)³ | 10 to –6026 to –50 |
| Range Displayed (dBm) | Down to –65Down to –50 |
| Number of Calibrated Wavelengths⁴ | 1010 |
| Power Uncertainty⁵ | ±5% ± 1 nW±5 % ± 10 nW |
| Resolution (dB) | 0.01 ⁶0.01 ⁷ |
| Automatic Offset Nulling⁸ | YesYes |
| Warm-up period (min)⁹ (s) | 00 |
| Display Units | dB, dBm, WdB, dBm, W |
| Tone Detection | 270 Hz, 1 kHz and 2 kHz270 Hz, 1 kHz and 2 kHz |
| Automatic Wavelength Recognition¹⁰ | YesYes |
| Screen Refresh Rate (Hz) | 33 |
| Tone Detection (Hz) | 270, 1 k, 2 k270, 1 k, 2 k |
| Battery Life (hours)(typical) | > 300> 300 |
| Warranty and Recommended Recalibration Interval (years) | 33 |
| Features | Parameters |
| Size (H x W x D) | 185 mm x 100 mm x 55 mm (7 1/4 in x 4 in x 2 1/8 in) |
| Weight | 0.4 kg (0.9 lb) |
| Operating Temperature | –10 °C to 50 °C (14 °F to 122 °F) |
| Storage Temperature | –40 °C to 70 °C (–40 °F to 158 °F) |
| Relative Humidity | 0% to 95% non-condensing |
Richiedi un preventivo
Misuratore di Potenza EXFO FPM-302
Risposta entro 24 ore
Senza impegno
Comunicazione diretta