EXFO FTB-LTC-B-1000-XX-YY Cavo di Test di Lancio
EXFO FTB-LTC-B-1000-XX-YY Launch Test Cable
Richiedi un preventivo
EXFO FTB-LTC-B-1000-XX-YY cavo di test di lancio con fibra monomodale da 1000 m copre la zona morta OTDR per una misurazione accurata della perdita delle prime e ultime connessioni in fibra.
Dettagli prodotto
| Modello | FTB-LTC-B-1000-XX-YY |
| Produttore | EXFO |
| Categoria | Test di Reti e Fibre Ottiche |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
L'EXFO FTB-LTC-B-1000-XX-YY è un cavo di test di lancio da 1000 metri progettato per funzionare in concomitanza con un OTDR. Copre la zona morta dell'OTDR, consentendo misurazioni accurate della perdita sulla prima e ultima connessione di un collegamento in fibra in prova. Questo modello monomodale con fibra 9/125 µm è essenziale per il commissioning e la risoluzione dei problemi della fibra completi.
Caratteristiche Principali
- Fibra monomodale da 1000 m di lunghezza (9/125 µm, G.652D)
- Perdita di inserzione del connettore inferiore a 0,5 dB
- Riflettanza: UPC inferiore a –50 dB, APC inferiore a –60 dB
- Attenuazione tipica: 0,37 dB/km a 1310 nm, 0,25 dB/km a 1550 nm
- Disponibile con molteplici tipi di connettore: FC/APC, SC/APC, FC/UPC, ST/UPC, SC/UPC, E2000/UPC, E2000/APC, LC/UPC, LC/APC
- Cavo esterno patch: 2 × 1,5 m
Applicazioni
- Installazione OTDR e risoluzione dei problemi delle reti di accesso in fibra
- Misurazione della perdita dei primi e ultimi eventi del connettore nei collegamenti in fibra
- Commissioning della nuova infrastruttura in fibra
- Manutenzione della rete e verifica delle prestazioni
Specifiche tecniche
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Weight | 325 g 0.72 lb 2.72 kg 6 lb 1.36 kg 3 lb |
| External Patchcord Length | 2 x 1.5 m 2 x 5 ft 2 x 2 m 2 x 6.6 ft 2 x 2 m 2 x 6.6 ft |
| FTB-LTC-B-1000 | Launch test cable, single module for FTB platform, singlemode fiber 9/125, 1000 m |
Richiedi un preventivo
EXFO FTB-LTC-B-1000-XX-YY Cavo di Test di Lancio
Risposta entro 24 ore
Senza impegno
Comunicazione diretta