Cavo di Test di Lancio Monomodale EXFO SPSB-B-150-88-88
EXFO SPSB-B-150-88-88 Singlemode Launch Test Cable
Richiedi un preventivo
EXFO SPSB-B-150-88-88 è un cavo di test di lancio monomodale da 150m con doppi connettori SC/APC per la copertura della zona morta OTDR e la caratterizzazione delle fibre.
Dettagli prodotto
| Modello | SPSB-B-150-88-88 |
| Produttore | EXFO |
| Categoria | Test di Reti e Fibre Ottiche |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
L'EXFO SPSB-B-150-88-88 è un cavo di test di lancio portatile utilizzato con riflettometri ottici nel dominio del tempo (OTDR) per la caratterizzazione accurata delle fibre e il commissioning. Questo cavo monomodale da 150m copre la zona morta dell'OTDR, consentendo una misurazione precisa della perdita alle connessioni delle fibre che altrimenti sarebbero non misurabili.
Caratteristiche Principali
- Fibra monomodale da 150m (9/125 µm)
- Connettori SC/APC su entrambi i lati
- Perdita di inserzione del connettore inferiore a 0.5 dB
- Riflettanza del connettore inferiore a −60 dB (APC)
- Design portatile con borsa morbida
- Consente la misurazione della perdita alle prime e ultime connessioni delle fibre
- Riduce gli accoppiamenti dei connettori OTDR per estendere la durata dell'apparecchiatura
- Lunghezza ideale per zone morte del polso OTDR standard
Applicazioni
- Caratterizzazione delle fibre OTDR e commissioning della rete
- Installazione e troubleshooting dei link in fibra
- Misurazione della perdita su connessioni critiche in fibra
- Test di assicurazione della qualità delle reti e dei link in fibra
Specifiche tecniche
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
Richiedi un preventivo
Cavo di Test di Lancio Monomodale EXFO SPSB-B-150-88-88
Risposta entro 24 ore
Senza impegno
Comunicazione diretta