Cavo di Test di Lancio EXFO SPSB-B-150-98-88
EXFO SPSB-B-150-98-88 Launch Test Cable
Richiedi un preventivo
EXFO SPSB-B-150-98-88 è un cavo di test di lancio monomodale da 150 m per test OTDR in fibra, consentendo la misurazione della perdita sulle prime e ultime connessioni delle fibre.
Dettagli prodotto
| Modello | SPSB-B-150-98-88 |
| Produttore | EXFO |
| Categoria | Test di Reti e Fibre Ottiche |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
L'EXFO SPSB-B-150-98-88 è una scatola soppressore di impulsi morbida portatile da 150 metri per test OTDR (Optical Time-Domain Reflectometer). Consente una misurazione precisa della perdita nei punti di connessione delle fibre colmando la zona morta dell'OTDR, che è essenziale per una caratterizzazione accurata dei link in fibra e la verifica dell'installazione.
Caratteristiche Principali
- Fibra monomodale da 150 m (9/125 µm) estende l'intervallo di misurazione OTDR oltre la zona morta
- Connettori SC/APC per compatibilità con la maggior parte delle porte OTDR e dei pannelli di patch
- Perdita di inserzione del connettore < 0.5 dB per minima degradazione del segnale
- Riflettanza del connettore APC < –60 dB per misurazioni di backscatter accurate
- Borsa portatile morbida per distribuzione sul campo
- Riduce l'usura del connettore OTDR eliminando l'accoppiamento diretto
Applicazioni
- Caratterizzazione e misurazione della perdita dei link in fibra ottica
- Test di accettazione dell'installazione per reti in fibra
- Troubleshooting e manutenzione dei cavi
- Misurazione della perdita della prima e dell'ultima connessione negli span in fibra
Specifiche tecniche
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-150 | Soft pulse suppressor bag, singlemode fiber 9/125, 150 m |
| 88 | SC/APC narrow key |
| 98 | LC/PC |
Richiedi un preventivo
Cavo di Test di Lancio EXFO SPSB-B-150-98-88
Risposta entro 24 ore
Senza impegno
Comunicazione diretta