Alimentatore DC Farnell AP100-30 con autorange
Farnell AP100-30 Autoranging DC Power Supply
Richiedi un preventivo
Farnell AP100-30 è un alimentatore DC con autorange da 1 kW con uscita 0–100 V / 0–30 A, modalità tensione/corrente costante e controllo remoto GPIB.
Dettagli prodotto
| Modello | AP100-30 |
| Produttore | Farnell |
| Categoria | Alimentatori e Carichi Elettronici |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
Farnell AP100-30 è un alimentatore DC con autorange da 1 kW che presenta un concetto di autorange unico che fornisce un'ampia gamma regolabile di combinazioni tensione e corrente all'interno del suo inviluppo di potenza costante. Questo design flessibile lo rende ideale sia per applicazioni da laboratorio che per sistemi, spesso soddisfacendo i requisiti presenti e futuri con un singolo strumento.
Caratteristiche principali
- Inviluppo di potenza da 1 kW con intervallo di uscita 0–100 V / 0–30 A
- Combinazioni tensione e corrente con autorange
- Modalità operazione tensione costante o corrente costante
- Passo tensione: 25 mV, accuratezza di programmazione: 0,2% + 0,13% f.s.
- Passo corrente: 10 mA, accuratezza di programmazione: 1,1% + 0,13% f.s.
- Controllo manuale o interfaccia remota IEEE 488.2 (GPIB)
- Misuratori a pannello LED digitale e annunciatori di stato
- Capacità di rilevamento remoto (compensazione caduta fino a 0,5 V per conduttore)
- Operazione master/slave per aumentare potenza o tensione
- Involucro montabile su rack
Applicazioni
- Alimentatore da laboratorio per sviluppo e prototipazione
- Integrazione di sistema per apparecchiature di test automatizzate
- Test di componenti e sottosistemi che richiedono potenza stabile
- Test di carico e validazione dei prodotti
Specifiche tecniche
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP100-30 | 25mV10mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP100-30 | 0-100V/0-30A |
Richiedi un preventivo
Alimentatore DC Farnell AP100-30 con autorange
Risposta entro 24 ore
Senza impegno
Comunicazione diretta