Rohde & Schwarz SMHU58 Generatore di Segnali ad Alta Precisione
Rohde & Schwarz SMHU58 High Accuracy Signal Generator
Richiedi un preventivo
Generatore RF ad alta precisione Rohde & Schwarz SMHU58 con intervallo da 100 kHz a 4.32 GHz e risoluzione di 0.1 Hz per applicazioni avanzate di ricevitore e LO.
Dettagli prodotto
| Modello | SMHU58 (0835.8011.58) |
| Produttore | Rohde & Schwarz |
| Categoria | Generatori di Segnali RF e Microonde |
| Disponibilità | Su ordinazione |
Descrizione
Panoramica
Lo Rohde & Schwarz SMHU58 è un generatore RF ad alte prestazioni progettato per applicazioni di test e misura impegnative. Con copertura di frequenza fino a 4.32 GHz e purezza spettrale eccezionale, l'SMHU58 è ideale per test di ricevitori, applicazioni di oscillatore locale e sistemi di misura del rumore dove l'integrità del segnale è critica.
Caratteristiche Principali
- Intervallo di frequenza: da 100 kHz a 4320 MHz con risoluzione di 0.1 Hz
- Tempo di impostazione della frequenza: inferiore a 10 ms
- Modalità sweep veloce: fino a 200 frequenze definite dall'utente in meno di 1 ms per impostazione
- Purezza spettrale eccezionale per misure di canale adiacente e fuori canale
- Modulazione FM: da DC a 1 MHz con offset di frequenza minimo in modalità FM DC
- Modulazione AM: da DC a gamma completa di frequenza di modulazione con risposta in frequenza piatta per test di ricevitori VOR/ILS
- Modulazione a impulsi: tempi di salita/discesa di 20 ns (tipicamente <10 ns per frequenze >200 MHz) con rapporto on/off di 80 dB
- Offset di fase: regolabile in passi di 1°
Applicazioni
- Test di selettività e sensibilità del ricevitore
- Applicazioni di riferimento oscillatore locale a basso rumore
- Segnale di riferimento per sistemi di misura del rumore
- Test di telemetria e comunicazioni satellitari
- Test di sistemi radar e di collegamento a microonde
Specifiche tecniche
| Frequency | The frequency can be set with a resolution of 0.1 Hz over the entire range, and this is sufficient even for measurements on extremely narrowband DUTs. Both instruments supply frequencies down to 1 kHz. The frequency setting time is below 10 ms. In the fast mode up to 200 user-defined frequencies can be handled by means of a trigger signal or by memory sweep in less than 1 ms per setting. |
| Spectral Purity | R&S®SMGU/SMHU fulfill requirements for selectivity measurements on top-class receivers. Signals of extremely high spectral purity afford critical adjacent-channel, in-channel and out-of-channel measurements with a wide tolerance margin. Phase noise remains low right up to the carrier. R&S®SMGU/SMHU are therefore ideal for LO applications or as a low-noise reference in noise measurement systems. |
| Frequency Modulation | The FM modulation frequency range extends from DC to 1 MHz. In FM DC mode a high carrier-frequency accuracy is attained. The frequency offset occurring with FM DC selected is extremely small. |
| Amplitude Modulation | The whole of the modulation frequency range can be used down to carrier frequencies of less than 100 kHz. The minimal phase shift at 30 Hz (AM DC) and a flat frequency response make for the precision amplitude modulation that is required for testing VOR/ILS navigation receivers. |
| Pulse Modulation | Rise/fall times of 20 ns (typ. <10 ns for frequencies >200 MHz) and an on/off ratio of 80 dB open up a wide range of possibilities for testing telemetry, microwave link, radar and satellite communications systems. |
| Digital and Analog Sweep | In addition to the digital, step-by-step sweep with presettable start and stop frequency, span, step width and step time, an analog frequency and level sweep is also provided. |
| Phase Offset | The phase of the RF output signal can be varied in steps of 1 using keyboard entry or the spinwheel. This makes it easier to adjust for phase quadrature during noise measurements and to investigate phase-critical components. |
Richiedi un preventivo
Rohde & Schwarz SMHU58 Generatore di Segnali ad Alta Precisione
Risposta entro 24 ore
Senza impegno
Comunicazione diretta